Skip to content
Menu

Thermal Drone Inspection

Find the hot spot before it finds you.

Radiometric thermal inspection of substations, power lines, solar arrays, and commercial roofs. Fast to fly, no outage, and every finding paired with a visual frame and coordinates.

Thermal infrared

Thermal, from the air.

A thermal drone inspection uses an infrared camera on a drone to measure surface temperatures, revealing overheating components, failed solar cells, and trapped roof moisture without outages or climbing.

Heat is often the first sign of a failing connection, a shorted cell string, or wet insulation, and it shows up long before anything breaks. We fly a radiometric thermal camera alongside a high-resolution visual camera, so every anomaly comes with a temperature reading, a matching photo, and a location your crew can find. Assets stay in service, nobody climbs, and the inspection that used to take a week of truck rolls is usually done in a day.

Thermal has limits, and we plan around them: electrical assets need to be under load, solar arrays need strong sun, and roofs read best after a clear, sunny day. We schedule the flight for the right window, set emissivity per surface, and tell you plainly what the data can and can’t show. For the longer version, read our guide, Finding Faults Fast.

A temperature, a photo, and a location for every finding, not a folder of rainbow images.

Thermal inspection at a glance

What it finds
Overheating connections and components, failed solar cells and strings, wet roof insulation
Sensor
1280 × 1024 radiometric thermal, ≤ 50 mK sensitivity (manufacturer-rated)
Accuracy
±2 °C or ±2% in high-gain mode (manufacturer-rated, lab conditions)
Outage
None. Non-contact, with assets in service
Deliverables
Radiometric images, paired visual frames, annotated anomaly report, thermal orthomosaic
Licensing
FAA Part 107 certified remote pilots
Insurance
$1M per occurrence / $2M aggregate business liability; $5M drone-services coverage; additional insured available
Turnaround
Standard delivery within 48 hours of capture, often 24; 1.6 business days average post-mission
Thermal substation inspection by drone
Substations & lines

Catch the failing connection while it’s still a repair.

Loose or corroded connections, overloaded phases, and failing transformer bushings run hotter than their neighbors. Flying close, from several angles, we record the temperature of each component and compare it with similar components under the same load, so your engineers can prioritize by temperature rise rather than guesswork.

  • Connections, clamps, and splices
  • Breakers, disconnects, and busbars
  • Transformers and bushings
  • Insulators and arresters
Solar panel inspections by drone
Solar & roofs

Map the whole array or the whole roof.

For solar arrays and commercial roofs we fly a grid and stitch a thermal orthomosaic, so every hot cell, failed string, or wet section of roof is pinned to a map. On roofs, that means targeted core cuts and repairs instead of a full tear-off; on solar, a punch list your O&M crew can work row by row.

    Read: drones in roofing

    Thermal deliverables

    Findings your crew can act on.

    1. Radiometric imagery

      Every thermal frame keeps per-pixel temperature data for your own analysis.

      R-JPEG · TIFF

    2. Anomaly report

      Each finding with temperature rise, paired visual photo, coordinates, and a priority.

      PDF · CSV · KMZ

    3. Thermal orthomosaic

      A stitched thermal map of solar blocks or roofs, aligned with a visual orthomosaic.

      GeoTIFF

    4. Access

      Files delivered directly to your team, with optional browser viewing in our client portal.

      Direct delivery · optional portal

    Applications

    What we inspect

    Anything where heat signals a problem before it becomes a failure.

    • Substations

      Connections, breakers, transformers, and bushings, with assets in service.

    • Distribution lines

      Splices, clamps, and transformers along the circuit, without a bucket truck.

    • Transmission structures

      Targeted thermal and visual capture on selected structures.

      Utility and Energy Infrastructure Drone Services →
    • Solar arrays

      Cell, string, and diode faults on a mapped thermal orthomosaic.

    • Commercial roofs

      Wet-insulation patterns for targeted repair instead of replacement.

    • Building envelopes

      Heat-loss and moisture patterns on walls and façades.

    Specification

    Thermal capture specs

    Thermal capture
    ParameterManufacturer-rated
    Thermal resolution1280 × 1024 radiometric (R-JPEG), 8–14 μm band
    Sensitivity≤ 50 mK NETD, so small temperature differences stand out
    Measurement range & accuracy−4 °F to 302 °F in high-gain mode (±2 °C or ±2%); up to 1,112 °F in low-gain mode (±5 °C or ±3%)
    Paired visual48 MP wide camera and 40 MP zoom camera on the same payload, so every hot spot has a visual frame
    GeolocationLaser rangefinder, 3 m to 3,000 m, for target coordinates
    EnduranceUp to 59 minutes of flight with the thermal payload on our heavy-lift platform (no wind); IP55 aircraft
    ConditionsElectrical under load · solar in strong sun · roofs after a clear, sunny day

    Manufacturer-rated figures for the equipment we fly. Field accuracy depends on emissivity, distance, and weather, and settings are recorded per asset.

    Drone vs traditional

    Which thermal method fits the job?

    Which thermal method fits the job?
    ConsiderationDrone thermalHelicopter thermalHandheld / ground
    MobilizationDaysWeeksDays
    ProximityClose, multiple anglesDistantLimited by access
    CoverageWhole substation, array, or roof in one visitLong corridorsOne component at a time
    Cost per siteLowerHigherLow but slow
    Best forSubstations, targeted lines, solar, roofsLong patrolsSpot checks

    Bottom line: For substations, solar, roofs, and targeted line work, drone thermal is closer, faster to schedule, and covers the whole asset. Helicopters still suit very long patrols; handheld cameras suit spot checks.

    Why UAV Chicago

    Thermal data you can defend.

    Plan

    • Load, sun, and weather windows
    • Emissivity set per surface
    • Airspace and site access handled

    Fly

    • Safe standoff from energized equipment
    • No outage, no climb
    • FAA Part 107, $5M coverage

    Report

    • Temperature rise and priority per finding
    • Paired visual and coordinates
    • Files delivered directly, optional portal
    How it works

    Four steps to a prioritized punch list.

    1. Scope

      Asset type, location, and what you need to find. We confirm access, clearances, and airspace.

    2. Schedule the window

      Flight timed for load, sun, or overnight cooling, with weather checked the day before.

    3. Capture

      Radiometric thermal and visual imagery together, close in and from several angles, or as a mapped grid.

    4. Analyze & report

      Anomalies measured, paired with photos and coordinates, prioritized, and delivered within 48 hours as standard.

      Thermal inspection questions

      When is the best time to do a thermal inspection?

      It depends on the asset. Electrical equipment should be under meaningful load, solar arrays need strong, steady sun, and roofs read best in the evening after a clear, sunny day, when wet insulation holds heat longer than dry.

      Do you need an outage?

      No. Thermal inspection is non-contact and done with assets in service. We keep a safe standoff and follow your site’s access and clearance rules.

      Is the thermal data radiometric?

      Yes. We record 1280 × 1024 radiometric imagery, so your engineers can read a temperature from every pixel. The manufacturer rates measurement accuracy at ±2 °C or ±2% in high-gain mode under lab conditions; emissivity and weather settings are applied per asset.

      What does the report include?

      Each finding gets its temperature rise, a paired visual photo, coordinates, and a priority, in a PDF with a CSV or KMZ you can load into GIS or your work-order system.

      Can a drone find roof leaks?

      It finds the wet insulation leaks leave behind. A thermal survey after a sunny day shows warm, wet areas so you can core-cut and repair those sections instead of replacing the whole roof.

      Is drone thermal better than a helicopter?

      For substations, solar, roofs, and targeted line work, usually yes: it’s closer to the asset, faster to schedule, and lower cost per site. Helicopters still make sense for very long transmission patrols.

      Thermal inspection

      Schedule a thermal flight.

      Tell us the asset type, location, and what you’re looking for. We’ll confirm the right inspection window and send a written scope and price, usually within 1 business day.